• Steca Solsum 6.6F PWM 6A/24V Charge Controller

    Overcharge protection. Deep discharge protection. Reverse polarity protection of module (≤ 36 V), load and battery. Automatic electronic fuse. Short circuit protection of load and module. Overvoltage protection at module input. Open circuit protection without battery. Reverse current protection at night. Overtemperature and overload protection. Load disconnection on battery overvoltage

    R324.41
  • pwm charge controller

    Epsolar Landstar PWM Charge Controller – 20A (12V/24V)

    The LS-EU economic solar controller is new member of LandStar family and ideal for small solar system especially home system and off grid applications.
    Based on the LS-E series, LS-EU series add a +5V/1.2A USB terminal output which can charge mobile phones, supply power to fans and other electronic device.
    Features:
    ·High efficient Series PWM charging, increase battery lifetime and improve solar system performance
    ·Use MOSFET as electronic switch, without any mechanical switch
    ·Intuitive LED indicators showing battery voltage status
    ·Gel, Sealed, and Flooded battery type optional
    ·Manual control the output of the load
    ·Temperature compensation, correct charging and discharging parameters automatically
    ·Humanized  Key, more comfortable and convenient
    ·Industrial grade design
    R363.33
  • BlueSolar PWM-Light Charge Controller 12/24V-5A

    Load output with low battery voltage disconnect function. Two digit, seven segment display for quick and easy setting of the load output functionality, including timer setting. Three stage battery charging alogrithum (bulk, absorption, float), not programmable. Load output protected against overload and short circuit.Internal protection against reverse polarity connection of the solar array and/or battery. Built-in lighting control function, one timer only. Day/night timing options: see manual for details

    R409.29
  • Steca Solsum 8.8F PWM 24V/8A Charge Controller

    The Steca Solsum F-Line continues the huge success of one of the most used SHS controllers. With a power range of up to 10 A at automatically recognized 12 V or 24 V it fits to a system sizes of maximum 240 W. Full circuit board protection with LED display for simple recognition of battery status. Various connections make it possible to connect easily to solar panels, battery and load. The Steca Solsum works on PWM as a low loss series controller.

    R415.49
  • MT50 remote meter

    EPSolar MT50 Tracer Remote Display – 10m RS485

    Part No: EP-MT50-10 Storage Systems – Display

    MT50 is an optional remote meter to monitor and program EPsolar controller, compatible with:LS-B, LS-BP,VS-BN, Tracer-BN,Tracer-A, eTracer, iTracer.

    R509.46
  • Steca Solsum 10.10F PWM 24V/10A Charge Controller

    The Steca Solsum F-Line continues the huge success of one of the most used SHS controllers. With a power range of up to 10 A at automatically recognized 12 V or 24 V it fits to a system sizes of maximum 240 W. Full circuit board protection with LED display for simple recognition of battery status. Various connections make it possible to connect easily to solar panels, battery and load. The Steca Solsum F works on PWM as a low loss series controller.

    R543.51
  • solar panel 50 Watt

    Cinco 50W 36 Cell Poly Solar Panel

    Part No: CNCC50-36 Panels – Off-Grid

    • Rating: 50W
    • Efficiency: 14.1%
    • Width: 510mm
    • Height: 695mm

    Manufactured with Premium quality input materials, Uses High-efficiency mono and poly crystalline silicon solar cells. Advanced EVA encapsulation system with multilayer back sheets for better module protection, Ideal modules for all On-Grid and Off-Grid applications, Long life , Continuous Performance under extreme conditions, Laminate enclosed in non-corroding anodized Aluminium frame, Weather proof junction box

    R567.00
  • BlueSolar PWM-Pro Charge Controller 12/24V-5A

    Three stage battery charging (bulk, absorption, float), fully programmable. Integrated battery monitor function (Remote Panel needed to display state of charge). Load output with low voltage disconnect and manual control (default setting).Optional external temperature sensor. Load output protected against over load and short circuit. Protectection against reverse polarity connection of the solar panels and/or battery. Intergrated lighting control function which is fully programmable. Day/night timing options: see manual Remote Panel for details.

    R573.20
  • BlueSolar PWM-Pro Charge Controller 12/24V-10A

    Three stage battery charging (bulk, absorption, float), fully programmable. Integrated battery monitor function (Remote Panel needed to display state of charge). Load output with low voltage disconnect and manual control (default setting).Optional external temperature sensor. Load output protected against over load and short circuit. Protectection against reverse polarity connection of the solar panels and/or battery. Intergrated lighting control function which is fully programmable. Day/night timing options: see manual Remote Panel for details.

    R654.63
  • off grid inverter

    Power Inverter 1200W Peak / 600W Nominal

    This inverter converts DC power from a battery into 230 Volt
    AC “modified sine wave” power. 600 Watts of continuous
    output power and a compact design make this unit ideal for
    running any of the following: Stereo’s, laptop’s, PC’s,
    chargers, LED Lights and many other home appliances.

     

    • Reliable, proven design.
    • Continuous operation.
    • High power, heavy duty.
    • Remote ON/OFF switch.

    **For more sensitive equipment we recommend using a pure sinewave inverter of the same size.

    R825.00
  • mppt charge controller

    Epsolar Tracer 1210A 10A MPPT Charge Controller – 12V/24V

     MPPT Charge Controller

     Tracer A series adopts a common positive design and advanced MPPT control algorithm. The products can track the MPP point fast and accurately in any situation which will improve energy efficiency and obtain the maximum solar energy.
    Features: 
    • Advanced MPPT technology
    • High tracking efficiency no less than 99.5%
    • Peak conversion efficiency of 98%
    • Ultra-fast tracking speed
    • Accurately recognizing and tracking of multiple power point
    • Multi-function LCD displays system information intuitively
    • User programmable for battery types, load control etc.
    • 3-Stage charge with PWM output
    • Common positive grounding design
    • RS485 port with industrial standard MODBUS open architecture
    • Fully programmable function via PC software or remote meter

     

    R941.04
  • pwm charge controller

    Epsolar ViewStar VS2024BN 20A PWM Charge Controller – 12V/24V

    PWM Charge Controller

    The ViewStar Series solar controller is designed for off-grid solar system, such as street lights, solar home systems or other small loads. It has LCD display, reliable battery charging , full electronic protection, and programmable parameters.

    Solar Backup has the VS4548BN and VS6048BN, which support 12, 24 and 48V systems.

    R953.61
  • BlueSolar PWM-Light Charge Controller 48V-10A

    Three stage battery charging (bulk, absorption, float), fully programmable. Integrated battery monitor function (Remote Panel needed to display state of charge). Load output with low voltage disconnect and manual control (default setting).Optional external temperature sensor. Load output protected against over load and short circuit. Protectection against reverse polarity connection of the solar panels and/or battery. Intergrated lighting control function which is fully programmable. Day/night timing options: see manual Remote Panel for details.

    R982.56
  • solar panel 100 watt

    Cinco Solar 100W 36 Cell Poly Solar Panel

    Off-Grid

    • Rating: 100W
    • Efficiency: 14.8%
    • Width: 680mm
    • Height: 995mm

    Aesthetic appearance with excellent efficiency
    based on innovative photovoltalic technologies

    High quality,strong aluminium frame,passing
    mechanical load testing 5400 Pa and wind
    pressure 2400Pa

    10 years limited product warranty

    10 years at90% of the minimal rated power output

    25 years at80% of the minimal rated power output

     

    R1,011.00
  • mppt charge controller

    Epsolar Tracer 2210CN 20A MPPT Charge Controller – 12V/24V

    MPPT Charge Controller

    Tracer BN series is EPsolar’s second generation of MPPT controller. Compared with CLASSIC Tracer series, it has extensive communication ability. And the die-cast aluminum design ensures excellent heat dispersion.

    Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 30% and potentially decrease the power of solar array needed.

    • Maximum conversion efficiency of 98%
    • Accurately recognizing and tracking of multiple power points
    • Wide MPP operating voltage range
    • Die-cast aluminum design, ensuring excellent heat dissipation characteristic
    • Multiple load control modes: manual control, light ON/OFF, light On+Timer and time control.
    • Battery temperature compensation function.
    • Real-time energy statistics function.
    • PV short circuit  protection
    • PV over current protection
    • PV reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery reverse polarity protection
    • Load overload protection
    • Load short circuit protection
    • Battery overheating protection
    • Controller overheating protection
    R1,084.23
  • Steca PR1010 PWM 24V/10A Charge Controller

    The Steca PR 10-30 series of charge controllers is the highlight in the range. Use of the latest charging technologies combined with state of charge determination enable optimal battery maintenance and module power monitoring. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user.

    R1,118.39
  • BlueSolar PWM-Pro Charge Controller 12/24V-20A

    Three stage battery charging (bulk, absorption, float), fully programmable. Integrated battery monitor function (Remote Panel needed to display state of charge). Load output with low voltage disconnect and manual control (default setting). Optional external temperature sensor. Load output protected against over load and short circuit. Protectection against reverse polarity connection of the solar panels and/or battery.
    Intergrated lighting control function which is fully programmable. Day/night timing options: see manual Remote Panel for details.

    R1,131.48
  • Steca Solarix PRS3030 PWM 24V/30A Charge Controller

    The simplicity and high performance of the Steca Solarix PRS solar charge controller make it particularly appealing. At the same time, it offers a modern design and a convenient display, all at an extremely attractive price. Several LEDs in various colours emulate a tank display, which gives information on the battery‘s state of charge. Here, Steca’s latest algorithms are employed, resulting in optimal battery maintenance.
    The Solarix PRS charge controllers are equipped with an electronic fuse, thus making optimal protection possible

    R1,165.31
  • mppt charge controller

    Epsolar Tracer 1215BN 10A MPPT Charge Controller – 12V/24V

    MPPT Charge Controller

    Tracer BN series is EPsolar’s second generation of MPPT controller. Compared with CLASSIC Tracer series, it has extensive communication ability. And the die-cast aluminum design ensures excellent heat dispersion.

    Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 30% and potentially decrease the power of solar array needed.

    • Maximum conversion efficiency of 98%
    • Accurately recognizing and tracking of multiple power points
    • Wide MPP operating voltage range
    • Die-cast aluminum design, ensuring excellent heat dissipation characteristic
    • Multiple load control modes: manual control, light ON/OFF, light On+Timer and time control.
    • Battery temperature compensation function.
    • Real-time energy statistics function.
    • PV short circuit  protection
    • PV over current protection
    • PV reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery reverse polarity protection
    • Load overload protection
    • Load short circuit protection
    • Battery overheating protection
    • Controller overheating protection
    R1,175.69
  • mppt charge controller

    Epsolar Tracer 3210CN 30A MPPT Charge Controller – 12V/24V

    MPPT Charge Controller

    Tracer BN series is EPsolar’s second generation of MPPT controller. Compared with CLASSIC Tracer series, it has extensive communication ability. And the die-cast aluminum design ensures excellent heat dispersion.

    Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 30% and potentially decrease the power of solar array needed.

    • Maximum conversion efficiency of 98%
    • Accurately recognizing and tracking of multiple power points
    • Wide MPP operating voltage range
    • Die-cast aluminum design, ensuring excellent heat dissipation characteristic
    • Multiple load control modes: manual control, light ON/OFF, light On+Timer and time control.
    • Battery temperature compensation function.
    • Real-time energy statistics function.
    • PV short circuit  protection
    • PV over current protection
    • PV reverse polarity protection
    • Battery over voltage protection
    • Battery over discharge protection
    • Battery reverse polarity protection
    • Load overload protection
    • Load short circuit protection
    • Battery overheating protection
    • Controller overheating protection
    R1,254.08
  • BlueSolar PWM-Light Charge Controller 48V-20A

    Load output with low battery voltage disconnect function.  Two digit seven segment display for quick and easy setting of the load output functionality, including the timer setting.  Three stage battery charging (bulk, absorption, float), not programmable. Load output protection against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Lighting control function, one timer only. Day/night timing options: see manual for details

    R1,260.86
  • Steca PR1515 PWM | Charge Controller 15A 12V/24

    The Steca PR 10-30 series of charge controllers is the highlight in the range. Use of the latest charging technologies combined with state of charge determination enable optimal battery maintenance and module power monitoring. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user.

    R1,294.79
  • Steca PR2020 PWM | Charge Controller 20A (12/24V)

    The Steca PR 10-30 series of charge controllers is the highlight in the range. Use of the latest charging technologies combined with state of charge determination enable optimal battery maintenance and module power monitoring. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user

    R1,455.59
  • Steca Solsum 4040 PWM | Charge Controller 40A (12/24V)

    Solar charge controllers Steca Solsum 2525 and 4040 are newly developed products based on our internationally renowned controller family Solarix PRS. With increased module and load current, the controllers are now also suitable for even larger systems. The devices also feature an integrated USB charging port for charging smartphones and tablets. The controllers demonstrate impressive performance, are simple to use and offer unbeatable value for money. Several LEDs in various colours give information on the battery‘s state of charge. Here, Steca’s latest algorithms are employed, resulting in optimal battery maintenance. The Steca Solsum charge controllers are equipped with an electronic fuse, thus making optimal protection possible. They operate on the serial principle, and separate the solar module from the battery in order to protect it against overcharging.For larger projects, the charge controllers can also be equipped with special functions: e.g. with night light function and selectable charging plateau and deep-discharge protection voltages.

    R1,472.67

Prices Are VAT Inclusive Dismiss