-
You've just added this product to the cart:
1000V Protection Pack 12 Inputs 12 Outputs 16A Isolator Type I_II SPD
1000V Protection Pack 12 Inputs 12 Outputs 16A Isolator Type I_II SPD
This part is made up of the following items:2 x DCB-NF-6I-1000V-I16A-I_II-6O 1000V Protection Box 6 Inputs 6 Outputs 16A Isolator Type I_II SPD Quad Tracker Package
This is a package intended to offer robust DC surge protection for larger commercial inverters. It comprises 2 x DCB-NF-6I-1000V-I16A-I_II-6O to allow for complex DC design across multiple module orientations.
The spec for the individual boxes:
Outdoor-rated DC box for easily adding protection features to the PV strings into your MPPT. The box includes several features that reduces the amount of separate components you need to install.
Inputs and Outputs
This unit combines 12 PV input pairs into 12 DC outputs. The inputs and outputs have MC4 connectors pre-fitted. There is also a gland output for earthing.
DC isolation: rated at 16A and 1000V
DC surge protection
This unit has Citel Type 1 & 2 DC surge arrestors included and is suitable for installation sites that experience frequent lightning strikes. The SegenSolar design tool estimates the strike rate of a given postcode location and recommends whether Type 1 or 2 protection is appropriate.
-
You've just added this product to the cart:
AC Protection Box 1 Inputs 1 Output 125A 10kA
AC Protection Box 1 Inputs 1 Output 125A 10kA
AC Protection Box
Protect your whole commercial system from AC surges with one box.
The AC Protection box is to be used as the protection between up to 6 grid-connected inverters and the utility grid.
The AC Protection box is designed to protect the input to the inverter with the built in AC surge protection device and to protect the inverter from any potential cable fault that may occur between the output of the inverter and the point of common coupling with the grid.
The AC combiner board is also fitted with a power quality meter that displays information about the system such as Grid voltage, grid frequency, phase and system current (inverter output), Power factor, active and reactive power values.
- 6 Inputs, each rated at 125A.
- Maximum input cable size: 35mm2
- 800A output breaker rating
- AC Surge protection rating: 25kA
- IP65 rated for external use
-
You've just added this product to the cart:
1000V Protection Box 2 Inputs 2 Outputs 16A Isolator Type I_II SPD
1000V Protection Box 2 Inputs 2 Outputs 16A Isolator Type I_II SPD
Outdoor-rated DC box for easily adding protection features to the PV strings into your MPPT. The box includes several features that reduces the amount of separate components you need to install.
Inputs and Outputs
This unit combines 2 PV input pairs into 2 DC outputs. The inputs and outputs have MC4 connectors pre-fitted. There is also a gland output for earthing.
DC isolation: rated at 16A and 1000V
DC surge protection
This unit has Dehn or Citel Type 1 & 2 DC surge arrestors included and is suitable for installation sites that experience frequent lightning strikes. The SegenSolar design tool estimates the strike rate of a given postcode location and recommends whether Type 1 or 2 protection is appropriate.
-
You've just added this product to the cart:
1000V Protection Box 4 Inputs 4 Outputs 16A Isolator Type I_II SPD
1000V Protection Box 4 Inputs 4 Outputs 16A Isolator Type I_II SPD
DC protection box for multi-MPPT commercial inverters.
Outdoor-rated DC box for easily adding protection features to the PV strings into your MPPT. The box includes several features that reduces the amount of separate components you need to install.
Inputs and Outputs
This unit combines 4 PV input pairs into 4 DC outputs. The inputs and outputs have MC4 connectors pre-fitted. There is also a gland output for earthing.
DC isolation: rated at 16A and 1000V
DC surge protection
This unit has Citel Type 1 & 2 DC surge arrestors included and is suitable for installation sites that experience frequent lightning strikes.
There is a surge arrestor for every two strings, so intended for each inverter MPPT for a large commercial inverter
-
You've just added this product to the cart:
600V Combiner Box 2 Inputs 1 Outputs 32A Isolator Type II SPD
600V Combiner Box 2 Inputs 1 Outputs 32A Isolator Type II SPD
Outdoor-rated DC combiner box for connecting parallel PV strings into your MPPT. The box includes several features that reduces the amount of separate components you need to install.
Inputs and Outputs:
This unit combines 2 PV input pairs into one DC output. The inputs have MC4 connectors pre-fitted and the main output is a gland. There is also a gland output for earthing.
DC isolation: rated at 32A and 600V
DC surge protection
This unit has Citel Type 2 DC surge arrestors included and is suitable for installation sites that experience less frequent lightning strikes. -
You've just added this product to the cart:
600V Fused Combiner Box 7 Inputs 1 Outputs 63A Isolator Type I_II SPD
600V Fused Combiner Box 7 Inputs 1 Outputs 63A Isolator Type I_II SPD
Outdoor-rated DC combiner box for connecting parallel PV strings into your MPPT. The box includes several features that reduces the amount of separate components you need to install.
Inputs and Outputs
This unit combines 7 PV input pairs into one DC output. The inputs have MC4 connectors pre-fitted and the main output is a gland. There is also a gland output for earthing.
DC isolation: rated at 63A and 500V
DC surge protection
This unit has Citel Type 1 & 2 DC surge arrestors included and is suitable for installation sites that experience frequent lightning strikes. The SegenSolar design tool estimates the strike rate of a given postcode location and recommends whether Type 1 or 2 protection is appropriate.
DC fuses
Protect your modules from high reverse current. This combiner box includes 12A 500V DC fuses
-
You've just added this product to the cart:
600V Protection Box 1 Inputs 1 Outputs 16A Isolator Type II SPD
600V Protection Box 1 Inputs 1 Outputs 16A Isolator Type II SPD
Outdoor-rated DC box for easily adding protection features to the PV strings into your MPPT. The box includes several features that reduces the amount of separate components you need to install.
Inputs and Outputs
This unit combines 1 PV input pair into 1 DC output. The input and output have MC4 connectors pre-fitted. There is also a gland output for earthing.
DC isolation: rated at 16A and 600V
DC surge protection
This unit has Citel Type 2 DC surge arrestors included and is suitable for installation sites that experience less frequent lightning strikes.
-
You've just added this product to the cart:
600V Protection Box 2 Inputs 2 Outputs 16A Isolator Type I_II SPD
600V Protection Box 2 Inputs 2 Outputs 16A Isolator Type I_II SPD
Photovoltaic DC Protection Board-Wall Mounted (surface type ) IP65. Intended for use with Low voltage DC Strings up to 500Vdc and a Max Current of 16A per String. This product caters for the 2 individually connected PV strings (2 x MMPT type inverters). Each string individually Isolatable by means of built in miniature circuit breaker. Each String also has an integrated Surge Protection Device – individually providing protection to each string. For ease of installation, PV String connection is via original Multi-Contact MC-4 Connectors for input and output connections. A PVC compression gland is provided for Surge protection device cable connection
-
You've just added this product to the cart:
600V Protection Box Type 2 For SE 2200-3680 & H
600V Protection Box Type 2 For SE 2200-3680 & H
Solar Edge outdoor-rated DC box for easily adding protection features to the PV strings into your MPPT. The box includes several features that reduces the amount of separate components you need to install.
Inputs and Outputs:
This unit combines 3 PV input pairs into 3 DC outputs. The inputs and outputs have MC4 connectors pre-fitted. There is also a gland output for earthing.
DC isolation: rated at 15A and 1000V
DC surge protection
This unit has Type 2 DC surge arrestors included and is suitable for installation sites that experience less frequent lightning strikes. -
You've just added this product to the cart:
AC DB Box Pre-Wired
AC DB Box Pre-Wired
This AC DB Box is ideal for Hybrid Inverter installations and comes with the following:
- 1 x 40A Earth Leakage
- 1 x 40A Isolator
- 1 x 40A Change Over Switch
- 1 x AC SPD Type II
All pre wired to make installation easy and fast.
-
You've just added this product to the cart:
Busbar to connect 5 VIC-MEGA-HOLDER
Busbar to connect 5 VIC-MEGA-HOLDER
-
You've just added this product to the cart:
2 String DC Combiner Box with SPD's - 18A/per string
2 String DC Combiner Box with SPD’s – 18A/per string
This is suitable for an array with less then 18A current rating.
- 12 way Din Rail DB Box
- 2 x Double Pole 10 x 38 Fuse Holder
- 4 x 20/32A Fuses
- 2 x SPD Type II
-
You've just added this product to the cart:
DC Combiner Box with SPD - 18A
DC Combiner Box with SPD – 18A
This is suitable for an array with less then 18A current rating.
- 8 way Din Rail DB Box
- 2 Pole 10 x 38 Fuse Holder
- 2 x 20A Fuses
- 1 x DC SPD Type II
-
You've just added this product to the cart:
DC Combiner Box with SPD - 80A
DC Combiner Box with SPD – 80A
This is suitable for an array with less then 18A current rating.
- 8 way Din Rail DB Box
- 2 x Double Pole Fuse Holder
- 2 x 80A Fuses
- 1 x 1000v SPD Type II
-
You've just added this product to the cart:
Dektite Lead Multicable Solar Flashing (Tiled or Slate)
Dektite Lead Multicable Solar Flashing (Tiled or Slate)
· Allows up to 10 PV cables to be taken safely and tidily through any tile or slate roof
· Avoids risk of damage or pressure on cables by isolating from tiles or slates
· Dektite® quality EPDM boot provides completely weatherproof seal
· Acrylic protected lead apron – safe to handle, no staining, easily dressed to roof
· 20 year warranty -
You've just added this product to the cart:
MC4 In Line Fuse 20A 1500V DC single
MC4 In Line Fuse 20A 1500V DC single
The in-line fuse PV-K/ILF with a crimping connection guarantees a long-lasting, stable connection in comparison to conventional clip-in clamps:
- Minimal energy loss, low heat generation
- Robust housing, safety class IP68
- Cable cross section 10 AWG/6 mm²
- Cable cTÜVus certified
- Standard length: 55 cm (1500 V)
-
You've just added this product to the cart:
PV Panel Lightning Kit
PV Panel Lightning Kit
The kit is consists of:
- 5 meter x 16mm square copper earth cable
- 25 meter x 4mm square earth cable for bonding
- 1.2 meter Copper coated Lightning Rod
This kit works in conjunction with our DC-Combiner box that has Type II DC Surge Arresters installed
-
You've just added this product to the cart:
Wood screw pan head 6 x 80/57 TORX 25
Wood screw pan head 6 x 80/57 TORX 25
Wood screw pan head 6.0x80mm Torx25
-
You've just added this product to the cart:
KETO Battery Disconnector with 125A Fuses
KETO Battery Disconnector with 125A Fuses
-
You've just added this product to the cart:
KETO Battery Disconnector with 160A Fuses
KETO Battery Disconnector with 160A Fuses
-
You've just added this product to the cart:
KETO Battery Disconnector with 40A Fuses
KETO Battery Disconnector with 40A Fuses
-
You've just added this product to the cart:
KETO Battery Disconnector with 80A Fuse
KETO Battery Disconnector with 80A Fuse
-
You've just added this product to the cart:
NH Fuse-link 125A for KETO-00
NH Fuse-link 125A for KETO-00
