10kVA Victron – 15kWh Storage – 30 units p/d


The Ultimate Powerhouse: 10kVA Victron Energy Package

Key Features:

10Kva Victron Energy Inverter: Optimal and efficient power conversion to meet your energy demands.
6600W Solar Panel Array: Convert sunlight into power in the most effective way with a high-energy yield.
15kWh Lithium Battery Bank: Provides a superior storage solution ensuring you always have power when you need it.
Comprehensive Installation: Incorporates both DC and AC DB Boxes for a streamlined and hassle-free connection.
Advanced Protection Systems: Surge protection devices installed on both AC and DC sides, safeguarding your investment from unforeseen power fluctuations.
Informative Package: Manuals to guide you and a COC Certificate ensuring the system’s compliance and authenticity.
Certified Installations: Adhering to SANS and SAPVIA regulations to guarantee the highest quality and safety standards.

🔗 Optional Extra: Extended Warranty. More trust, more peace of mind. Our package offers an extended warranty option for those seeking added assurance.

🔗 With the 10kVA Victron Energy Package, you’re not just getting a solar solution; you’re investing in peace of mind, efficiency, and a greener future. Ready to make the switch?

SKU: victron-30-P

Victron Quattro 48V/10000VA/140/100/100 | 8000W Inverter

Two AC inputs with integrated transfer switch :
The Quattro can be connected to two independent AC sources, for example, the public grid and a generator, or two generators. The Quattro will automatically connect to the active source.
Two AC Outputs :
The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a water heater, for example, can be connected to this output.

  • 5-year warranty

Temporarily unavailable

Pylon UP5000 4.8kWh Li-Ion Solar Battery 48V × 3

The UP5000 is a 48V, 4.8kWh lithium ion battery with incredible features to provide a competitive edge in the market.

  •  5-year warranty



Temporarily unavailable

TIER1 Solar Panel 550W Mono PERC Half-Cell MBB JA × 12

550W is the latest in JA Solar's 72-cell range. This module with its 11-bus-bar half-cell configuration can reach a peak power output of 550W. This module offers better temperature-dependent performance and enhanced tolerance for mechanical loading.

Temporarily unavailable

Cable Pack for US2000 / US3000 / UP5000 Phantom-S Batteries × 2

Pylon battery cable accessory kit for use with the US2000B, US2000B Plus and Phantom-S models. Each battery unit includes the interlink battery cables for parallel connection to another battery, whereas this pack is for connecting to the charger.
You require one cable pack per system, with a maximum of 5 batteries. With a system of more than 5 batteries, an additional cable pack would be required.
This cable pack includes the following cables:
2 x 2m long power cables (positive and negative)
1 x 3.5m RJ45 Communication cable (Not for CAN communication)

Temporarily unavailable

Mounting Kit Roof Parallel (12 Panels)

Package Consists of :

  • Variosole Mounting Rail 41 x 35 x 3300mm
  • End Clamp 30 – 50mm Silver
  • Middle Clamp 31 – 51mm Silver
  • Roof Hook/Anchor bolt/Seam Clamp
  • Variosole Rail Connectors for rail 41 x 35 mm

The kit comes with the right amount of each component to adhere to Sans regulations. Some roofs use more components than others, due to size, shading, rafters, and other factors seen during installation. As this is part of a full turn-key solution, we supply, enough to get the job done regardless of the changeable factors

Temporarily unavailable

SmartSolar MPPT RS 450/100 Tr 48V-100A

The MPPT RS SmartSolar is a 48V Solar charge controller with up to 450VDC PV input and either 100A, or 200A output. It is used in on-grid and off-grid solar applications where maximum battery charging power is required.

Product Features:

  • Multiple MPPT Tracking inputs
  • Isolated PV connections for additional safety
  • 80 to 450 VDC input range with 120VDC start-up voltage
  • Display and Bluetooth
  • VE CAN and VE direct port
  • Configure and monitor with Victron Connect APP
  • 30 Day history on individual MPPT
  • 2 x MPPT

Temporarily unavailable

Victron Cerbo GX

The Cerbo GX provides intuitive control and monitoring. It has the same functionality as the Colour Control GX, with a few extras: - lower cost, mainly because it has no display or buttons

Product Features

  • 4 resistive tank level inputs
  • 4 temperature inputs
  • 4 digital inputs
  • WiFi & Bluetooth to Victron Connect App
  • HDMI & USB to connect touch 50 or other display
  • Ethernet port
  • 3 x USB ports
  • Micro SD card
  • 2 x relay outputs
  • BMS Can
  • VE Can
  • Ve Bus
  • 3  x VE Direct ports

Temporarily unavailable

GX Touch 50

Panels and system monitoring.

The GX Touch 50 and GX Touch 70 are display accessories for our Cerbo GX. The five inch and seven inch touch screen displays give an instant overview of your system and allow to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, Their super slim waterproof design, top-mountable setup and simple installation bring a lot of flexibility when creating a crisp and clean dashboard.

Temporarily unavailable

2xBrackets - Pylon UP5000 × 3

A set of battery brackets that allows vertical stacking of the Pylon battery unit. 1 set is required per additional battery added.

Temporarily unavailable

Lynx Distributor

A modular DC bus bar

Product Features

  •  with locations for four DC fuses
  •  It will monitor the status of each fuse, and indicate its condition with a LED on the front.
  •  Part of the modular Lynx distribution system.

The Lynx Distributor ships together with a 40cm RJ10 cable. This cable provides power to the Lynx Distributor and if connected to a Lynx Smart BMS, is also used to transmit data.

Fuses to be purchased separately

Temporarily unavailable

MEGA-fuse 300A/58V for 48V products (1 pc) × 4

The Victron fuse range is an easy DC protection and specially designed for all DC protection

  • Protective fuse cover
  • Approx volts drop is specified for every fuse
  • fuses have the volts and current specified
  • cold resistance specified on the datasheet for every fuse
  • 3 ranges are MIDI; MEGA and ANL (described on the datasheet)

Temporarily unavailable

Mounting Lockable Isolator 63A 3 Pole

Temporarily unavailable

MC4 Connector Twin Pack ( Kit 1 )

This part is made up of the following items:
2 x MC4-14-FEM MC4 Female Connector - 0014 Single
2 x MC4-15-MAL MC4 Male Connector - 0015 Single

 A pack of 2x Male and 2x Female cable couplers

(including insulating part)

  • Snap-in lock
  • Locking by safety lock clip PV-SSH4 in accordance with NEC 2011 can be released only with the tool
  • Proven MULTILAM technology with high long-term stability, which ensures consistently low-performance loss throughout the entire service life of the plug connector
  • Tried and tested plug connectors, 14 years of experience in the field
  • Suitable for assembly with cross-sections of 4 and 6 mm²

Rated current: 39 A (for 4 and 6mm2 cable)

Rated voltage: 1000 V IP Rating: IP65 / IP68 when mated (1h / 1min)  Cross section: 4 - 6 mm² Outer diameter cable (dA): 5,0 - 6,0mm

Please use correct MC4 approved tools to crimp these connectors onto bare cables.

Supplier code: 32.0014P0001-UR and 32.0015P0001-UR

Keywords: MC4CONN2PACK, Multi-Contact, PV Cable

Temporarily unavailable

VE.Direct Cable 1.8m

the VE. Direct cable is available in different lengths and is used as communication between the different Victron items.

  • these cables are used as communication between the Colour Control GX and MPPT solar Charge controllers and BVMV monitor

Temporarily unavailable

2m Fly Lead

Temporarily unavailable

Anti-island Box 63A for single & three phase

The anti-islanding box is a complete pre-wired and easy to install an anti-islanding device consisting of a Ziehl anti-islanding relay
(model UFR1001E or model SPI1021), the required circuit breakers and a 63A contactor.

Ziehl UFR1001E:
Certificates: G83/2 and G59/3 (UK),
Fulfills the requirements of NRS-097-2-1 (South Africa).

Ziehl SPI1021:
Certificate: CEI 0-21 (Italy).

Temporarily unavailable

PV Panel Lightning Kit

The kit is consists of:

  • 16mm square copper earth cable
  • 4mm square earth cable for bonding
  • Copper coated Lightning Rod

This kit works in conjunction with our DC-Combiner box that has Type II DC Surge Arresters installed

Temporarily unavailable

GX Touch 50 Wall Mount

The GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount onto the wall.

Temporarily unavailable

18 Way DB Box Surface Mount

Temporarily unavailable

MOD Indicator light G & Y

Temporarily unavailable

63A Breakers 2P - SABS Approved × 2

Temporarily unavailable

AC Surge Arrestor 2P - SABS Approved

Temporarily unavailable

63A Change Over 2P - SABS Approved

Temporarily unavailable

63A Earth Leakage 2P - SABS Approved

Temporarily unavailable


Temporarily unavailable

10MM GP RED 25

Temporarily unavailable


Temporarily unavailable

6mm RED SOLAR CABLE 50 × 2

Temporarily unavailable

100x100 White Trunking × 4

Temporarily unavailable


Temporarily unavailable

12 Way DB Box Surface Mount

Temporarily unavailable

DC Isolator - SABS Approved × 2

Temporarily unavailable

32A Fuse 10x38 - SABS Approved × 4

Temporarily unavailable

2 Pole Fuse Holder 10x38 - SABS Approved × 2

Temporarily unavailable

DC Surge Arrestor - SABS Approved × 2

Temporarily unavailable

Certificate Of Compliance

When any work is done that changes the Ac cabling a COC is issued and when there are panels involved a DC annexure is issued that supplements the COC

Temporarily unavailable

Electrical Compliancy and Labour × 1300

Electrical Installation.

This is the wiring of the electrical part of your system, inverters, change-over switches, additional AC boxes, DC boxes and includes the supply of AC cabling. This also includes all bonding and fitment of necessary earth spike/s or additional surge protection and wiring thereof. Also splitting of your DB BOX to comply with SA Regulations. Testing and compliancy is also done during this part of the installation.

Temporarily unavailable

This product is currently unavailable.

Warranty Information

All products come with manufacturer warranty. Manufacturer warranty claim forms can be found under DATA SHEETS. If there is no warranty form there please request one from our offices.