5kVA Victron – 5kWh Storage – 16 units per day

The MultiPlus-II fits seamlessly into all common energy storage topologies

There is no one-size-fits-all solution to energy storage. The building blocks, topology and control systems will depend on local preferences and regulations. The MultiPlus-II hardware, together with a wide range of software tools, seamlessly fits in all common topologies, shown in the pictures below.

• 5-year warranty

Pylon battery cable accessory kit for use with the US2000B, US2000B Plus and Phantom-S models. Each battery unit includes the interlink battery cables for parallel connection to another battery, whereas this pack is for connecting to the charger.
You require one cable pack per system, with a maximum of 5 batteries. With a system of more than 5 batteries, an additional cable pack would be required.
This cable pack includes the following cables:
2 x 2m long power cables (positive and negative)
1 x 3.5m RJ45 Communication cable (Not for CAN communication)

A single wall mount Battery bracket made to fit Kodak and Pylontech batteries

550W is the latest in JA Solar's 72-cell range. This module with its 11-bus-bar half-cell configuration can reach a peak power output of 550W. This module offers better temperature-dependent performance and enhanced tolerance for mechanical loading.

Bluetooth Smart built-in: dongle not needed > The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.

Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve.

Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F). Flexible charge algorithm Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).

Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.

The Cerbo GX provides intuitive control and monitoring. It has the same functionality as the Colour Control GX, with a few extras: - lower cost, mainly because it has no display or buttons

Product Features

• 4 resistive tank level inputs
• 4 temperature inputs
• 4 digital inputs
• WiFi & Bluetooth to Victron Connect App
• HDMI & USB to connect touch 50 or other display
• Ethernet port
• 3 x USB ports
• Micro SD card
• 2 x relay outputs
• BMS Can
• VE Can
• Ve Bus
• 3  x VE Direct ports

Panels and system monitoring.

The GX Touch 50 and GX Touch 70 are display accessories for our Cerbo GX. The five inch and seven inch touch screen displays give an instant overview of your system and allow to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, Their super slim waterproof design, top-mountable setup and simple installation bring a lot of flexibility when creating a crisp and clean dashboard.

Add robust and secure battery disconnection with the Keto range from Jean Müller. They are well known for their attention to detail in ensuring maximum user safety.

MC-4 contact doubler - Pack of 2 Pairs
MC-4 splitter kit, consisting of:
2 x MC-T splitter sockets
(2 x female connectors, 1 x male connector)
2 x MC-T4 splitter plugs
(2 x male connectors, 1 x female connector)
For time-saving, safe contact duplication without additional connectors

The kit is consists of:

• 16mm square copper earth cable
• 4mm square earth cable for bonding
• Copper coated Lightning Rod

This kit works in conjunction with our DC-Combiner box that has Type II DC Surge Arresters installed

The GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount onto the wall.

When any work is done that changes the Ac cabling a COC is issued and when there are panels involved a DC annexure is issued that supplements the COC

Electrical Installation.

This is the wiring of the electrical part of your system, inverters, change-over switches, additional AC boxes, DC boxes and includes the supply of AC cabling. This also includes all bonding and fitment of necessary earth spike/s or additional surge protection and wiring thereof. Also splitting of your DB BOX to comply with SA Regulations. Testing and compliancy is also done during this part of the installation.