Off Grid 100kWh per day – 16kw Inverter Single Phase

Off Grid 100kWh per day – 16kw Inverter Single Phase

LOGIN / REGISTER TO GET A PRICE

This package comes with a powerful 16 KW Inverter system single phase, 20KWp  Solar Array and 16 x 3.5kWh Lithium Battery (Usable battery power is 50.4Kwh with a 4500 Cycle Life.),  It comes fully installed with Additional DC and AC DB Boxes with all required Protection and Surge protection devices on both AC and DC Side. Manuals and COC Certificate. All Installations are done to SANS and SAPVIA regulations.

Victron Quattro 48V/10000VA/140/100/100 | (8000W Inverter/Charger) × 2

Two AC inputs with integrated transfer switch :
The Quattro can be connected to two independent AC sources, for example the public grid and a generator, or two generators. The Quattro will automatically connect to the active source.
Two AC Outputs :
The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.

Temporarily unavailable

JA Solar 370W Mono Percium 5BB Silver Frame × 54

 

  • Rating: 370W
  • Efficiency: 19%
  • Width: 991mm
  • Height: 1,960mm

KEY FEATURES

  • JA 5BB design module reduce cell series resistance and stress between cell interconnectors improves modules reliability and module conversion efficiency
  • Mono cell technology with passivated backside - PERC - (Passivated Emitter and Rear Cell) for increased efficiency and yield
  • High power output and module efficiency up to 19%

RELIABLE QUALITY

  • Positive power tolerance: 0 - +5W
  • 100% EL double-inspection ensures modules are defects free
  • Modules binned by current to improve system performance
  • Potential Induced Degradation (PID) Resistant

 

Temporarily unavailable

SmartSolar MPPT 250V/100A-Tr | (12/24/36/48V-100A) × 4

Ultra-fast Maximum Power Point Tracking (MPPT). Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 99%.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).

Temporarily unavailable

Pylon US3000 3.5kWh Li-Ion Battery × 16

Advantages

Vertical industry integration ensures more than 4500 cycles with 90% DoD or 6000 cycles with 80% DOD (please note most devices will set the DOD at 80%). Compact and fashionable design fits in your home environment. Deliver up to 5KW* with a single module (3.5KWh) - * please note this value is inverter/charger dependant, typically the maximum achieved value is 1.8kW per battery. Modular design gives the end customers the power of choice of capacity
Compatible with a large number of Hybrid inverters. Simple buckle fixing minimize the installation time and cost

  • Comes with a 7 year Warranty

Temporarily unavailable

Pylon/BAK x4 Cabinet With Support Rails US3000B/2.56Bak × 4

For housing for up to 4 x PylonTech US3000B Lithium-Ion batteries

New, upgraded cabinet specially redesigned for Pylontech batteries.
Batteries slide into cabinet on steel rails.
The guide rails are correctly spaced to shorten installation time and improve installation neatness.

Temporarily unavailable

Mounting Kit IBR (16 Panels) × 3

Package Consists of :

  • 8 x Variosole Mounting Rail 50 x 37 x 4200mm
  • 16 x End Clamp   30 - 50mm Silver
  • 30 x Middle Clamp   31 - 51mm Silver
  • 34 x Variosole Hanger Bolt M10 x 200 Wood Substructure
  • 4 x Variosole Rail Connectors for rail 50 x 37 mm

Temporarily unavailable

Mounting Kit IBR (6 Panels)

Package Consists of :

  • 4 x Variosole Mounting Rail 50 x 37 x 4200mm
  • 4 x End Clamp   30 - 50mm Silver
  • 10 x Middle Clamp   31 - 51mm Silver
  • 14 x Variosole Hanger Bolt M10 x 200 Wood Substructure
  • 2 x Variosole Rail Connectors for rail 50 x 37 mm

Temporarily unavailable

Cable Pack for US2000B / Phantom-S Batteries × 4

Pylon battery cable accessory kit for use with the US2000B, US2000B Plus and Phantom-S models. Each battery unit includes the interlink battery cables for parallel connection to another battery, whereas this pack is for connecting to the charger.
You require one cable pack per system, with a maximum of 5 batteries. With a system of more than 5 batteries, an additional cable pack would be required.
This cable pack includes the following cables:
2 x 2m long power cables (positive and negative)
1 x 3.5m RJ45 Communication cable (Not for CAN communication)

Temporarily unavailable

Busbar to connect 5 VIC-MEGA-HOLDER × 2

Temporarily unavailable

Carlo Gavazzi Victron ET112 Energy Meter - 1 phase - max 100A

Storage Systems - AC Sensor

New Victron Energy Meter ET112. Single phase up to max 100A direct connection.

Temporarily unavailable

AC DB Box Pre-Wired

This AC DB Box is ideal for Hybrid Inverter installations and comes with the following:

  • 1 x 40A Earth Leakage
  • 1 x 40A Isolator
  • 1 x 40A Change Over Switch
  • 1 x AC SPD Type II

All pre wired to make installation easy and fast.

Temporarily unavailable

DC Combiner Box with SPD - 18A × 4

This is suitable for an array with less then 18A current rating.

  • 8 way Din Rail DB Box
  • 2 Pole 10 x 38 Fuse Holder
  • 2 x 20A Fuses
  • 1 x DC SPD Type II

 

Temporarily unavailable

DC Power Cable 5m (1A Slowblow)

Storage Systems - Communication Cable

Fused power cable for the Victron Colour Control GX.

Temporarily unavailable

Interface MK3-USB (VE.Bus to USB)

Storage Systems - Communication Cable

Interface unit for applying firmware updates.

 

 

Temporarily unavailable

RJ45 S-FTP-5m Lithium comm cable for Victron installs

Storage Systems - Communication Cable

Pre-made communication cable for linking the Victron Colour Control GX to the CAN interface of certain Li-Ion batteries:

- LG Chem

- Pylontech

- BYD

Temporarily unavailable

RS485 to USB interface cable 1.8 m

Storage Systems - Communication Cable

 

This RS485 to USB cable is needed to do a wired connection from a Energy Meter to the ColorControl GX or Venus GX

It can be used with the following Energy meters:

ET112 - 1 phase maximum 100A

ET340 - 3 phase maximum 65A/phase

EM24 - 3 phase maximum 65A/phase

Temporarily unavailable

Victron CCGX WiFi Module Long

Storage Systems - Communication Module

The Victron WiFi module is a dual-band wireless USB network adaptor that enables the Colour Control GX to connect to a WiFi network.

Temporarily unavailable

Victron Colour Control GX

The Colour Control GX is a highly intelligent monitoring device that can be connected to multiple Victron products including; inverters, battery devices and multis.

Important

For installations with Pylon, BYD and LG Chem, you will need x1 RJ45-S-FTP-5M per Colour Control for communication between the Colour Control GX and the batteries

Temporarily unavailable

Wall mounted enclosure for Color Control GX

Storage Systems - Accessory

Temporarily unavailable

PV Panel Lightning Kit

The kit is consists of:

  • 5 meter x 16mm square copper earth cable
  • 25 meter x 4mm square earth cable for bonding
  • 1.2 meter Copper coated Lightning Rod

This kit works in conjunction with our DC-Combiner box that has Type II DC Surge Arresters installed

Temporarily unavailable

COC (Certificate of Compliance)

The COC is an important part of the solar installation and is needed for peace of mind and insurance purposes.

Temporarily unavailable

Installations, Labour, Delivery & Additional Materials × 20000

Installation for This PV Systems.

  • This includes Traveling,
  • Delivery of Components,
  • Additional parts needed for installations. (parts may include but are not limited to circuit breakers, cable clips/ties trunking etc.)

 

Installations is worked out by the size of your solar array as the size will determine the size of the other components and labour involved.

Please Note that we do not do any installations on geysers. we only supply them. We can suggest an installer.

Additional charges may be added when accommodation needs to be arranged for installers and other technicians. (This seldom happens and will be arranged prior to fitment)

 

 

Temporarily unavailable

This product is currently unavailable.
  • Warranty

Warranty Information

All products come with manufacturer warranty. Manufacturer warranty claim forms can be found under DATA SHEETS. If there is no warranty form there please request one from our offices.

  • Register
Lost your password? Please enter your username or email address. You will receive a link to create a new password via email.
We do not share your personal details with anyone.